Commercial Concrete Flatwork in Wichita, KS
Wichita Concrete Pros pours commercial concrete flatwork for businesses and properties across Wichita and Sedgwick County, Kansas. We are a licensed and insured concrete contractor. This service covers parking lots, approach aprons, loading docks, dumpster pads, and ADA-compliant sidewalks and ramps, the larger and heavier pours a residential crew is not set up for.
Commercial slabs are 4000 PSI air-entrained concrete on an engineered compacted base, with reinforcement and joint spacing sized to the loads the site carries. Truck lanes, aprons, and dock areas are poured thicker than car stalls, on a heavier base. A parking lot poured to residential thickness on a light base ruts and cracks under delivery traffic and Kansas freeze-thaw.
Built for the Loads
A commercial lot takes weight a driveway never sees, day after day. Semis, delivery vans, and loaded dumpsters press through the slab into the base. We thicken the slab where the heavy traffic runs, reinforce it to match, and compact the base to carry it. The pour is engineered to the traffic, not poured to a single default thickness.
Aprons, Docks, and ADA Routes
The hardest-working parts of a commercial site are its edges. An approach apron takes every vehicle turning in off the street. A loading dock takes the pounding of trucks backing to it. An ADA route has to hold its slopes and landings to stay compliant. We pour each to what it has to handle, tied into the main lot with the right joints.
Joints and Drainage Across a Big Pour
A large slab needs a plan for where it cracks and where the water goes. We lay out control joints across the bays so the concrete cracks on the lines, set expansion joints at the fixed points, and pitch the surface so water sheets to the drains instead of ponding. On a wide lot, the jointing and the slope are as much of the job as the pour itself.
After-Hours Staging
A working lot cannot close for a week. We stage commercial pours in sections and run them after hours or over a weekend so access stays open while the concrete cures. The phasing gets planned with you before we start, so customers and trucks keep moving around the fresh slab.
What It Costs
Commercial flatwork in Wichita is priced by the square footage, the slab thickness, the reinforcement, and the staging. A dumpster pad is a small pour; a full lot with aprons and ADA walks is a phased project. If the old surface has to come out first, we fold the tear-out and haul-away into the scope. Every site gets a free written estimate first.
Parking lot, apron, or dock ready to be replaced? (316) 555-0148 gets you a real person and a free estimate anywhere in Sedgwick County.
What commercial concrete work do you do?
Parking lots, approach aprons, loading docks, dumpster pads, and ADA-compliant sidewalks and ramps. These are larger, heavier pours than residential flatwork, built to carry truck and delivery traffic. We handle the base, the reinforcement, the jointing, and the finish across the site.
Can you pour without shutting the business down?
In most cases, yes. We stage commercial pours in sections and work after hours or over a weekend so the lot or the dock stays usable while the job moves. We plan the phasing with you up front so access and traffic keep flowing around the fresh concrete.
How thick is a commercial parking lot slab?
Thicker than a residential drive, because it carries heavier and more frequent loads. Truck lanes, aprons, and dock areas are poured deeper than car stalls, on a heavier compacted base, with reinforcement sized to the traffic. We set the thickness and steel to what the site actually carries.
Do you handle ADA sidewalks and ramps?
Yes. ADA work has to hold specific slopes, landing sizes, and detectable-warning surfaces to be compliant. We form the ramps and walks to those requirements and pour them as part of the flatwork package, so the accessible route meets code when the job is done.